Digitrade HS128 Manuel d'utilisateur télécharger pdf (Page 50)

English

4. Device PIN Features

4.1 Changing the device PIN

With the device PIN you can perform the following things:

- Change the device PIN

- Activate/deactivate the Lock-Out Mode

The factory set device PIN is: „8-7-6-5-4-3-2-1”. For security reasons it is very

important to change the device PIN to prevent data loss by actions from an

unauthorised person.

To change the device PIN, follow these steps:

1) Insert the smart card into the card slot.

2) Press the „CHANGE-PIN“ button on the keypad

And then „0“.

3) Conﬁrm your entry with „ENTER“.

4) Input the current 8-digit PIN and conﬁrm with „ENTER“. the „STATUS”-LED

ﬂashes twice.

5) Input the new 8-digit PIN and conﬁrm with „ENTER“.

6) Input the new 8-digit PIN again and conﬁrm with „ENTER“.

7) After the PIN has been successfully changed the „STATUS“-LED ﬂashes three

times and you will hear two beeps.

8) The smart card can now be removed.

If changing the PIN was unsuccessful, the „ERROR“-LED illuminates. Press the

„ESC“ button and begin at step 1. of changing the device PIN.

Note: The DIGITTRADE HS128 / HS256 only accepts 8-digit PIN. The PIN should be

chosen at random. Do not use any Trivial-PIN like ascending or descending number

patterns or personal oriented PIN.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

Pas de commentaire

Digitrade HS128 Manuel d'utilisateur Page 50