Digitrade HS128 Manuel d'utilisateur télécharger pdf (Page 49)

English

Follow these steps to change your smart card PIN:

1) Insert the Smart Card into DIGITTRADE HIGH SECURITY HDD

(see page 37).

2) Press the “CHANGE PIN” button and afterwards the “1” button.

3) Conﬁrm the entry with “ENTER”. The “STATUS” LED will ﬂash four

times.

4) Enter the current 8-digit PIN and press “ENTER” to conﬁrm the entry.

5) Enter the new 8-digit PIN and press “ENTER” again for conﬁrmation .

6) Enter the new conﬁrmed 8-digit PIN again and press “ENTER”.

After a successful PIN change, the Status -LED will ﬂash four times and

you will hear two beeps. The DIGITTRADE HIGH SECURITY HDD will be

identiﬁed by the system as a removable medium and the lighting of the

touchpad disappears.

The access is enabled and the Smart Card can be removed.

If the PIN change was not sucessful, the “ERROR” LED will ﬂash. Press

the “ESC” button and start again with the ﬁrst step of the PIN change.

3.3 Changing the smart card PIN

Note: The DIGITTRADE HIGH SECURITY HDD only accepts 8-digit PINs.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Pas de commentaire

Digitrade HS128 Manuel d'utilisateur Page 49